New Items

Product Details:

Features:
- 4G GSM module, LTE category 4 module with Temperature, Humidity and CO2, inbuilt 1100 MaH lithium battery, with display for displaying current Temperature, Humidity and CO2 values.- User can register up to 4 mobile number at controller to get SMS/call for any alert.- User can configure Temperature low & high value, Humidity low & high value and Co2 PPM low  & high-level value through SMS, so when any of the value increased or decreased instantly controller starts executing its function which causes instantly call and SMS goes to the four pre configured mobile numbers respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation.- Call and SMS if wire of sensors disconnected from controller. - In case of CO2 increased from configured high level value, then 3 amp relay will on till the CO2 level will not come down at configured high level value 20% reduction.   - example: let configured high level value 20000 ppm and low-level value 12000 ppm, if CO2 value will 20001 relay will on till then co2 value will not down and equal to 16000 ppm.- Controller will push current value of Temperature, Humidity and CO2 at cloud every 2 minutes interval to check the report at CMS application.- Rest button to restart device. - GSM Signal Strength, configured Temperature, Humidity and CO2 current high  Low will display , 4 line display module integrated.

Technical:
- 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage- Micro controller based   Industrial Grade GSM module.- 3-4 Amp relay to operate Industrial Exhaust Fans in case of  CO2 increased from configured high level value.- Display on Device box for current Temperature , Humidity and CO2 Level.- Inbuilt Lithium Ion Rechargeable battery backup up to 12 Hours.- 12 Volt AC/DC Adapter cum Charger. - GSM 3DBI Magnetic Mount Spring Antenna - 3m Cable. MHz Antenna : 900/1800/1900 MHz- Enclosure Box 201X121X80 mm (IP 65, ABS, white color).- Quick response time.- Fully customised solution- In House R&D and Production.- Purely Make in India Product.  

Additional Information:

• Item Code: THCO2
• Production Capacity: 1000
• Delivery Time: 10 Days
• Packaging Details: Enclosure Box 201X121X80 mm (IP 65, ABS, white color).

Product Details:

A Hooter / Sounder is used in Alarm System to alert peopleFlasher Light Hooter Siren Standalone for 220 volt Ac/ 110 Volt Ac Operate and 12 Volt DC, 24 Volt DC for Alarm System.HBeonLabs Flasher Light Siren Hooter – Revolving Light Type is available in various models 12 Volt DC Model, 24 Volt DC Model, 110 Volt AC Model, 220 Volt DC Model.
- It can be used as Standalone to run on 220 Volt AC by normal Switch- Can be connected with Security Alarm Panel- Can be Connected with Fire Alarm Panel- Can be Used as backup Alarm in Industrial Cranes Factories

Additional Information:

• Production Capacity: 1000
• Delivery Time: 10 working days

Product Details:

Solar Pump RMS is a remote monitoring solution which allows users and Government to monitor all data regarding Solar power generation, consumption, pump run time, pump water supply (LPM) and if any fault occur, instantly can give alert through SMS/Call and give data on the cloud of any analysis. This gateway can enhance your pump-drive to monitor remotely. Interactive Web-Portal represents historical and aggregated data, comparative analytical diagnosis and a guided root-cause for fault analysis. All data are logged and can be securely reviewed and analysed at any time from any location of the pump. User can also ON/Off, configure scheduling for ON/Off if any limited water requirement for any location, so the water wastage can also stop. 

 

Usage/Application: Solar Pump

Brand: Smart Kisan

Origin: Made in India

Input Voltage: 10 to 30V DC

Technology: 2G (900/1800MHz)/ 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage.

SIM Type: 3V and 1.8V - Micro SIM-Card

GNSS: GPS Supported

Antenna: High dBi Flexible Sticker Antenna LTE + GPS

Digital Input: 2 Channel Potential Inputs

Analog Input: 2 Channel - Current: 0 to 4mA

Digital Output: 1 Channel NPN

Communication Channel:  RS-485 with Transient Voltage Protection

Communication Type: Modbus - Master - RTU

Display: 16*2 Alpha Numeric Display

Application: Web-Portal and Android Application for monitoring and handling the pump.

Memory: Internal memory for Offline Storage in the RMS that can be retrieve through the SD card

Additional Information:

• Production Capacity: 10000
• Delivery Time: 15 Days

Product Details:

The digital Solar Pump Controller which controls the pump system and provides information about what the system is doing.   

For simple easy to understand, casual viewing of system status, the Solar Pump Controller provide all the information needed. Pump status, speed, common errors, remote switch status and communication status can all be clearly seen.   

   

   

   

Features:   

•       Easy configuration for a class of motor types.   

•       High-cost performance, pump more water with less cost.   

•       Perfect drive synchronous, asynchronous, BLDC, single phase.   

•       Small and exquisite, saving installation space and transport cost.   

•       Reducing on field installation complexity.   

•       Better Pump Output Per Available Solar Watts.   

•       Pump starts earlier in the day and can run even in low Solar power.   

•       Motor drive limits output safely to rating of motor.