IoT Products and Services

Product Details:

IoT based Mobile Tower Security (TPMS)IoT based real time Theft Prevention Management Systems (TPMS) with 4G GSM Based Automatic Controller, integrated camera and cloud and android based custom application
How it works:1. The 4G based controller connected with a) Door switch to get when Shelter door is open, b) Battery Loop, If battery loop is breaking the controller will get signal for the same, c) Battery Bank, if battery bank will disconnected or voltage below 36 volt controller will get signal, d) NO/NC / 12V input to Vibration Sensor alert, e) NO/NC / 12V input to Infrared Beam Sensor alert.2. The TPMS integrated with small camera mounted at front of TPMS encloser (that is extended version).3. When any of the above event happen immediately TPMS starts executing its function which causes instant capture the snapshot through the camera and push to the server and then call and SMS goes to the four pre-configured mobile numbers respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation. After the call and SMS the camera will again start taking pictures and push to the server until the user will not reset the alarm from the web or android application.4. TPMS will also push image and data through GPRS with controller Id, event id on the cloud server for MIS reports, also view and download the images captured by the camera.5. Web application/ Android App to new controller manage controller mobile numbers etc. (Add/Edit/Delete).6. TPMS can be activated and deactivated and reset alarm through the android/web app or remote to enter at premises.7. User level access, custom reports, live status of all controller.8. Heart beat (Health of the controller can also check at web/android application) to check the health of TPMS controller, if heart beat will not come in certain time, cloud will send SMS/call to the concern person.9. Web and android App will design with Client branding. No extra charges.10. A part of functionality of controller to send SMS and Calling, we can make a control room, where the Alarm/Hooter amplitude (118dB) keeps ringing with LED indication on the Screen when controller input tampered.11. Hooter can On/Off Through android/web app.12. TPMS reboot reason also available at MIS reports.13. TPMS Enclosure opening alert can also send through SMS/Call or display on control room screen, or on MIS android/web app.14. Call receiving status can also available at MIS reports.15. Battery Bank critical notification can send through SMS or display at control room screen. 16. Controller battery (2000 MAh) critical notification can send through SMS or display at control room screen.17. Supply of 48-volt SMPS notification can also get after certain time through SMS or display at control room screen.

Additional Information:

• Production Capacity: 100000

Product Details:

How it works:1. 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage, Temperature sensor with display for displaying current Temperature and Transformer Oil level.2. User can register up to 4 mobile number at controller to get SMS/call for any alert.3. User can configure Temperature low & high value and and Transformer Oil level low & high value through SMS/Web/Andriod App, so when any of the value increased or decreased instantly controller starts executing its function which causes instantly call and SMS goes to the four pre-configured mobile numbersrespectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation.4. Controller will push current value of Temperature and transformer Oil Level Status at cloud every 10 minutes interval to check the report at CMS application.

Additional Information:

• Production Capacity: 15000

Product Details:

Smart GSM 4G IoT Real Time Multiple Alerts and Monitoring System with cloud and android based custom application
How it works:1. The 4G based controller connected with eight 48 volt input No/Nc and name of the each input can configure through web/android application.2. When any of the above event happen immediately our Controller starts executing its function which causes instantly call and SMS goes to the four pre-configured mobile numbers respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation.3. Controller will also push data through GPRS with controller Id, event id(the input number that trigger) with Latitude , Longitude on the static IP cloud server for MIS, at Central Control Room MIS Screen will display the Controller details with Controller No, Event Details, Cloud can also make call and send SMS at four (can be add more) pre-configured mobile numbers respectively.4. Static IP based web application/ Android App to add new controller, manage controllers and mobile numbers etc. (Add/Edit/Delete).5. User level access, custom reports, live status of all controller.6. A part of functionality of controller to send SMS and Calling, we can make a control room, where the Alarm/Hooter amplitude (118dB) keeps ringing with LED indication on the Screen when controller any of the input tampered.7. Controller reboot reason also available at MIS reports.8. Call receiving status can also available at MIS reports.9. Controller battery (2000 MAh) critical notification can send through SMS or display at control room screen.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 10 Days
• Packaging Details: Its a customized product as per the requirement

Product Details:

Smart GSM 4G NVR Alert Detection System Controller We will  introduce standalone customize system ( 4G GSM based devices) detect pulse (12 Volt DC) if 64 port NVR detect any alert from the camera. How it works:The  4G  based controller connected with 64 port NVR to get the signal (12 Volt DC ) if 64 port NVR detect any alert from the camera, 4G  based controller starts executing its function which causes instant Siren play at the spot at high amplitude and then instantly call and SMS goes to the four pre configured mobile numbers respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation, also Control Room Screen will display the NVR details with NVR ID, NVR Location and NVR Status , Cloud an also make call and send SMS at  four pre-configured mobile numbers respectively. A part of functionality of 4G controller to send SMS and Calling ,We can make a control room  where the Siren/Hooter amplitude (120dB)  keeps ringing with LED indication on the Screen when 4 port NVR detect any alert from the camera. 

Additional Information:

• Production Capacity: 15000

Product Details:

IoT based real time Smart 3 Level Locking and Handling Systems with 4G GSM Based Automatic Controller How it works:1. The 4G based controller connected with No/NC or 24 volts out to open the locking system with 3 level of security. 2. First level of security is Geofence, the door will unlock if the controller is inside the geofence, lat long will configure through the app or web application, this option can be enabled or disable through the application.3. Second level of security, the application will generate 6 number of unique key when controller configure for the new job, that will display on the controller and person have to intimate the administrator to enter on the application for validate.4. Third level of the security, when the second level is validated, the administrator will also get system generated 6 number of unique key and have to ask the person to enter at controller from the keypad, if validated the controller will sand No/NC and 24 volts at 2 relay outputs as a signal to open the door. 1 input No/NC to get signal of the door is open or close.5. Static IP based web application/ Android App to configure controller and vehicle details etc. (Add/Edit/Delete).6. Start and stop new job, user level access, custom reports, live status of all controller.

Additional Information:

• Production Capacity: 15000

Product Details:

Micro controller-based device to start and stop conveyor belt motor with time delay and Industrial Siren for alert before starting conveyor belt motor with following features:
• Micro controller-based system • 5-20 Amp relay for NO and NC start and stop the conveyor belt motor.• LED on Device box for status of conveyor belt motor.• Input 3 Phase 440V for device power supply. • 110 dB Siren for alert before starting conveyor belt motor.• Enclosure Box 200X120X80 mm • Quick response time.• Fully customized solution• In House R&D and Production.• Purely Make in India Product.
 How Controller Device will Work:1. Micro controller-based system with push button to give NO and NC for start and stop the conveyor belt motor, with LED  for displaying current On/Off stratus of conveyor belt motor.2. When the push button pressed to ON the motor at the device, instantly siren will ON give the alert that conveyor belt is going to start, after 30 second 5-20 Amp relay will get energized to give signal to the belt motor to start.  3. Same process to stop, press push to stop, instantly 5-20 Amp relay stop energizing to give signal to the belt motor to stop.  

Additional Information:

• Production Capacity: 15000

Product Details:

IoT based real time Smart Digital Water Flow Meter with Telemetry for Groundwater extraction monitoringIoT based real time Smart Digital Water Flow Meter with Telemetry for Groundwater extraction monitoring with 4G GSM Based Automatic ControllerWe are introducing standalone customize system (4G GSM based devices) to get following data from digital water flow meter through serial communication.
Timestamp (Calculate at Controller when data get from flow meter through serial communcation)Cumulative forward flow volume (get from digital water flow meter through serial communication)Cumulative reverse flow volume (get from digital water flow meter through serial communication)Cumulative Net volume (get from digital water flow meter through serial communication)Cumulative Pump working hours (Calculate at Controller)Meter serial number (Configure at Controller)Device last calibration date (Calculate at Controller)Borewell id (Provided By CGWA) (Configure at Controller)

Additional Information:

• Production Capacity: 15000

Product Details:

GSM 4G Controller with Smoke & Motion4G based GSM based device with 10 PIR Motion Sensor , 10 Smoke to secure organisation area Premises is called " 4G GSM SMART GUARD (24X7) . with following features
4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage or QUECTEL Industrial Grade GSM module for 2G.Micro controller-based system with QUECTEL Industrial Grade GSM module.Easy installation and configuration.24 x 7 Security cum monitoring tool.Panic Button facility for emergency- instant calling and messaging.Motion sensor, with activate and deactivate through SMS or Remote.Smoke sensor always activated.Remote to activate and deactivate. siren can also stop from thatIndustrial grade siren with every controller.Easy to reconfigure and manage through registered numbers.Quick response time.

Additional Information:

• Production Capacity: 15000

Product Details:

GSM 4G/GPS ELock for Fuel TankIoT based real time Smart GSM 4G/GPS ELock for Fuel Tank with Geofencing Handling System
How it works:1. The 4G based controller connected with E-Lock Panel to open the Fuel tank with 2 level of authentication.2. First level: user Can open and close the fuel tank E-lock Panel through the cloud-based web application or android application.3. Second level: Geofence, the fuel tank E-lock Panel will open if the controller is inside the geofence, latitude and longitude will configure through the android app or web application, this option can be enabled or disable through the application.4. Static IP based web application/ Android App to configure controller and vehicle details etc. (Add/Edit/Delete).5. User level access, custom reports, live status of all E-Lock Panel controller.

Additional Information:

• Production Capacity: 150000

Product Details:

How it works:1. 2.4 GHz Wi-Fi (802.11 b/g/n, supporting WPA/WPA2) module, Temperature sensor with display for displaying current Temperature and Oven Status ( On/Off) (WiFi Model).2. 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage , Temperature sensor with display for displaying current Temperature and Oven Status ( On/Off) (GSM 4G Model).3. Controller will push current value of Temperature and Oven On/Off Status at cloud every 10 minutes interval to check the report at CMS application.4. User can On/Off Oven through CMS .
Features: • 2.4 GHz Wi-Fi (802.11 b/g/n, supporting WPA/WPA2) for IoT applications (WiFi Model).• 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage (GSM 4G Model).• Inbuilt Digital Temperature Sensoro Temperature accuracy: typical ± 0.3 ° Co Temperature resolution: Typical 0.01 °Co Working temperature: 0°C to 350°C• Display on Device box for current Temperature and Oven Status.• 12 Volt AC/DC Adapter.• Enclosure Box 200X120X80 mm (IP 65, ABS, white).• GSM 3DBI Magnetic Mount Spring Antenna - 3m Cable. MHz Antenna: 900/1800/1900 MHz.

Additional Information:

• Production Capacity: 15000